TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 463 of 1414
TM 9-2320-365-34-2 Change 2 8-11 8-4 TRANSFER CASE MODULE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP Equipment Conditions Transmission mounted on maintenance stand (para 7-5). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Stand, Maintenance, Automotive Engine (TM 9- 2320-365-20) Bracket Assembly, Lift, Transfer Case (Item 18, Appendix D) Tools and Special Tools (Cont) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Multiplier, Torque Wrench (Item 35, Appendix B) Materials/Parts Screw, Hex Head (8) (Item 78, Appendix C) Packing, Preformed (Item 172, Appendix F) Gasket (Item 43, Appendix F) Personnel Required (2) a. Removal. (1) Disconnect hose (1) from 45-degree fitting (2). (2) Remove 45-degree fitting (2) and screen (3) from transfer case module (4). (3) Remove preformed packing (5) from 45-degree fitting (2). Discard preformed packing. (4) Position transfer case lift bracket on transfer case module (4) with eight screws (6). (5) Tighten eight screws (6) to 42-50 lb-ft (57-68 N•m).