TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 461 of 1414
TM 9-2320-365-34-2 Change 2 8-10.1/(8-10.2 Blank) (8) Tighten four screws (11). (8.1) Tighten four screws (11) to 26-35 lb-ft (35-47 N•m). (8.2) Fold tabs on four screws (11). c. Follow-On Maintenance. (1) Check transfer case oil level (TM 9-2320-365-20). (1.1) Lubricate drive shaft universal joint and slip yoke (TM 9-2320-365-20-1). (2) Operate vehicle and check for proper operation of drive train (TM 9-2320-365-10). (3) Check seal for oil leaks. End of Task. NOTE Perform the following two steps on bearing cups equipped with tabs. NOTE • Perform the following step on kits equipped with screws P/N C5H5-24-39. • Perform the following step on kits equipped with shear head screws. • When correct torque is reached, bearing cap screw small hex head will break off.