TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 444 of 1414

TM 9-2320-365-34-2 7-18. TRANSMISSION ASSEMBLY REPLACEMENT (UNUSUAL CONDITIONS) (CONT) NOTE Perform steps (38) through (40) on transmission serial numbers prior to 6510032369. (38) Remove bolt (37) from transmission (2). (39) Position clamp (38) on transmission (2) with bolt (37). (40) Tighten bolt (37) to 42-50 lb-ft (57-68 N·m). (41) Install clamp (39) on transmission (2) with bolt (40) and self-locking nut (41). CAUTION Due to position of main housing module connector, extreme care must be taken when installing pigtail adapter connector. Failure to comply may result in damage to equipment. NOTE • If transmission with serial number prior to 6510032369 was removed and replaced with serial number 6510032369 and higher, a transmission adapter harness (part number 29519210) will be used to adapt transmission to transmission external wiring harness. • Install plastic cable ties as required. (42) Position transmission adapter harness (42) in main housing module receptacle (43) with bolt (44). (43) Tighten bolt (44) to 12-24 lb-ft (1-3 N·m). 7-122 Change 1