TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 443 of 1414
TM 9-2320-365-34-2 NOTE • Steps (27) and (28) require the aid of an assistant. • During installation of flexplate bolts, access each flexplate bolt by turning alternator pulley through a series of short arcs. (27) Position 12 bolts (23) in flexplate (20). NOTE Perform step (28) on vehicles equipped with transmission oil cooler tubes. (28) Tighten 12 bolts (23) to 18-22 lb-ft (24-30 N·m). NOTE Perform step (29) on vehicles equipped with transmission oil cooler hoses. (29) Install gasket (24), flywheel cover (25), and transmission oil cooler hose bracket (26) on flywheel housing (22) with four washers (27) and screws (28). (30) Position gasket (24), flywheel cover (25) on flywheel housing (22) with four washers (28). (31) Tighten four screws (26) to 21-25 lb-ft (30-35 N·m). (32) Install seal (29) on oil fill tube (30). (33) Install oil fill tube (30) in main housing module (31). (34) Position oil fill tube clamp (32) on transmission (2) with screw (33). (35) Tighten screw (33) to 32-45 lb-ft (50-61 N·m). (36) Position oil fill hose (34) on oil fill tube (30) and tube (35) with two clamps (36). (37) Tighten two clamps (36) to 24-48 lb-ft (3-5 N·m). Change 1 7-121