TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 442 of 1414
TM 9-2320-365-34-2 7-120 Change 2 7-18. TRANSMISSION ASSEMBLY REPLACEMENT (UNUSUAL CONDITIONS) (CONT) (17) Position 12 washers (14) and bolts (15) in torque converter housing module (16). (18) Tighten 12 bolts (15) to 37-45 lb-ft (50-61 N•m). (19) Position preformed packing (17) on 90-degree fitting (17). (20) Install 90-degree fitting (18) on transmission (2). (21) Remove five bolts (8) and transmission lifting bracket from adapter housing module (9). (22) Position five bolts (8) in adapter housing module (9). (23) Tighten five bolts (8) to 42-50 lb-ft (57-68 N•m). (24) Position six bolts (19) in flexplate (20). (25) Tighten six bolts (19) to 25-29 lb-ft (34-39 N•m). (26) Install plug (21) in flywheel housing (22). NOTE Perform steps (19) and (20) on vehicles equipped with PTO. NOTE • Perform steps (24) through (26) on vehicle serial numbers and higher. • Steps (24) and (25) require the aid of an assistant. • During installation of flexplate bolts, access each flexplate bolt by turning alternator pulley through a series of short arcs.