TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 414 of 1414
TM 9-2320-365-34-2 7-14. CONTROL VALVE MODULE STRAINER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Condition Control valve module removed (para 7-10). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 79, Appendix B) Tools and Special Tools (Cont) Wrench Set, Socket (Item 75, Appendix B) Materials/Parts Seal (Item 259, Appendix F) Gasket (Item 35, Appendix F) Strainer, Suction (Item 292, Appendix F) a. Removal. NOTE Perform step (1) on serial numbers prior to 6510032369. (1) Remove four bolts (1) from housing (2). NOTE Perform step (2) on serial number 6510032369 and higher. (2) Remove three bolts (1) from housing (2). (3) Remove housing (2) from channel plate (3). (4) Remove strainer (4) from channel plate (3). Discard strainer. (5) Remove gasket (5) from channel plate (3). Discard gasket. (6) Remove seal (6) from housing (2). Discard seal. 7-92