TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 412 of 1414
TM 9-2320-365-34-2 7-13. TRANSMISSION INTERNAL WIRING HARNESS REPLACEMENT (CONT) b. Installation. NOTE Perform steps (1) through (5) on serial number 6510032369 and higher. (1) Position harness (1) on channel plate (2) with two bolts (3). (2) Tighten two bolts (3) to 108-120 lb-in. (12-14 N·m). (3) Connect harness (1) to turbine speed sensor (4). (4) Connect harness (1) to pressure switch (5). (5) Connect harness (1) to nine solenoids (6). NOTE Perform steps (6) through (10) on serial numbers prior to 6510032369. (6) Position harness (1) on channel plate (2) with two bolts (3). (7) Tighten two bolts (3) to 108-120 lb-in. (12-14 N·m). (8) Connect harness (1) to turbine speed sensor (4). (9) Connect harness (1) to pressure switch (5). (10) Connect harness (1) to nine solenoids (6). 7-90 Change 1