TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 410 of 1414
TM 9-2320-365-34-2 7-13. TRANSMISSION INTERNAL WIRING HARNESS REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Condition Control valve module removed (para 7-10). Control valve module strainer removed (para 7-14). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Tools and Special Tools (Cont) Wrench, Torque, 0-150 lb-in. (Item 79, Appendix B) Wrench Set, Socket (Item 75, Appendix B) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 31, Appendix C) a. Removal. NOTE Cover will not be installed on transmission serial number 6510088864 and higher or if internal wiring harness P/N 29529474 is installed. (1) Remove four bolts (1) and cover plate (2) from stationary clutch valve body (3). 7-88 Change 1