TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 407 of 1414
TM 9-2320-365-34-2 (13) Measure lube regulator valve spring (11) for minimum free length of 1.77 in. (4.5 cm). (14) Measure main regulator valve spring (12) for minimum free length of 3.88 in. (9.9 cm). (15) Measure main control valve spring (13) for minimum free length of 1.77 in. (4.5 cm). (16) Measure C2 latch valve spring (14) for minimum free length of 1.60 in. (4.1 cm). (17) Measure exhaust back valve spring (15) for minimum free length of 1.14 in. (2.9 cm). (18) Measure C1 latch valve spring (16) for minimum free length of 1.82 in. (4.6 cm). (19) Measure converter regulator valve spring (17) for minimum free length of 2.52 in. (6.4 cm). c. Assembly. WARNING Use care when installing springs. Springs are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (1) Position turbine speed sensor (1) on main valve body (2) with two screws (3). (2) Tighten two screws (3) to 9-10 lb-ft (12-14 N·m). (3) Install control main valve (4), spring (5), stop (6), and retaining pin (7) in main valve body (2). 7-85