TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 394 of 1414
TM 9-2320-365-34-2 7-10. CONTROL VALVE MODULE REPLACEMENT (CONT) b. Installation. (1) Install gasket (1) on control valve module (2). WARNING Control valve module weighs approximately 65 lbs (30 kgs). Position a floor jack under control module prior to installation. Failure to comply may result in injury to personnel or damage to equipment. (2) Position control valve module (2) on main housing module (3) with 18 screws (4). NOTE Perform step (3) on transmissions serial number 6510032369 and higher. (3) Position transmission adapter harness (5) and control valve module (2) on main housing module (3) with 20 screws (4). (3.1) Tighten screws (4) to 38-45 lb-ft (51-61 N·m). (4) Connect oil hose (11) to 45-degree fitting (12) on control valve module (2). 7-72 Change 1