TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 393 of 1414
TM 9-2320-365-34-2 WARNING Control valve module weighs approximately 65 lbs (30 kgs). Position a floor jack under control module prior to removal. Failure to comply may result in injury to personnel or damage to equipment. (21) Remove 20 screws (36) from control valve module (30) and main housing module (37). (22) Position three jacking bolts in control valve module (30). CAUTION Tighten three jacking bolts evenly to break control valve module free from vehicle. Failure to comply may result in damage to equipment. (23) Tighten three jacking bolts on control valve module (30). (24) Remove control valve module (30) and gasket (38) from vehicle. Discard gasket. NOTE Perform step (25) on transmissions serial number 6510032369 and higher. (25) Remove control valve module (30), gasket (38) and transmission adapter harness (23) from transmission (7). Discard gasket. (26) Remove three jacking bolts from control valve module (30). Change 1 7-71