TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 375 of 1414
TM 9-2320-365-34-2 7-7. STATIONARY CLUTCH SOLENOID ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transmission internal wiring harness removed (para 7- 13) Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 79, Appendix B) Multimeter, Digital (Item 34, Appendix B) Goggles, Industrial (Item 25, Appendix B) Gloves, Rubber (Item 23, Appendix B) Wrench Set, Socket (Item 75, Appendix B) Materials/Parts Rag, Wiping (Item 59, Appendix C) Filter Element (3) (Item 25, Appendix F) Seal, Non-Metallic (2) (Item 259, Appendix F) Packing, Preformed (3) (Item 174, Appendix F) Packing, Preformed (3) (Item 176, Appendix F) Solvent, Dry Cleaning (Item 81, Appendix C) Dispenser, Pressure Sensitive Adhesive Tape (Item 31, Appendix C) a. Removal. Remove eight screws (1) and clutch valve body (2) from main valve body (3). b. Disassembly. NOTE Stationary clutch solenoid contains parts which cannot be interchanged. Tag all parts prior to removal. (1) Remove two face seals (1) from clutch valve body (2). Discard face seals. (2) Remove three filter screens (3) from clutch valve body (2). Discard filter screens. 7-53