TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 368 of 1414
TM 9-2320-365-34-2 7-6. TRANSMISSION RESILIENT MOUNT AND BRACKET REPLACEMENT This task covers: a. LH Removal b. LH Installation c. RH Removal d. RH Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions D% Transmission assembly removed (para 7-4). Hydraulic reservoir removed, if equipped (LH side) (TM 9-2320-365-20-4). Battery box removed (LH side) (TM 9-2320-365-20-3). Fuel tank removed (RH side) (TM 9-2320-365-20-3). Spare tire retainer removed (TM 9-2320-365-20-4). Intake air cleaner removed (TM 9-2320-365-20-3). RH or LH engine and transmission mount bracket removed (para 7-17). Tools and Special Tools Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Tools and Special Tools (Cont) Tool Kit, Genl Mech (Item 68, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Socket Set, Impact (Item 50, Appendix B) Wrench, Impact, Electric (Item 77, Appendix B) Goggles, Industrial (Item 25, Appendix B) Materials/Parts Bolt (4) (Item 11, Appendix F) Nut, Self-locking (8) (Item 129, Appendix F) Bolt (4) (Item 6, Appendix F) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of failing debris. Failure to comply may result in injury to personnel. a. LH Removal. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE • Steps (1) through (8) require the aid of an assistant. • Perform steps (1) and (2) on all vehicles not equipped with hydraulic reservoir. (1) Remove two collars (1) and bolts (2) from frame rail (3). Discard collars and bolts. (2) Remove two collars (4) and bolts (5) from frame rail (3). Discard collars and bolts. 7-46 Change 1