TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 367 of 1414
TM 9-2320-365-34-2 Change 2 7-45 7-5. TRANSMISSION TO MAINTENANCE STAND This task covers: a. Installation b. Removal INITIAL SETUP Equipment Condition Transmission assembly removed (para 7-4). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Stand, Maintenance, Automotive Engine (Item 74, Appendix B, TM 9-2320-365-20) Transmission Lift/Mounting Bracket Assembly (Item 20, Appendix D) Materials /Parts Bolt, Machine (4) (Item 16, Appendix C) Nut, Self-locking (4) (Item 52, Appendix C) Personnel Required (2) a. Installation. (1) Install transmission stand bracket (1) on transmission (2) with four bolts (3) and self-locking nuts (4). NOTE (2) Install transmission (2) on maintenance stand with four bolts (5) and nuts (6). b. Removal. NOTE (1) Remove four nuts (6), bolts (5), and transmission (2) from maintenance stand. (2) Remove four self-locking nuts (4), bolts (3), and transmission stand bracket (1) from transmission (2). Discard self-locking nuts. End of Task. WARNING Transmission weighs approximately 1300 lbs (590 kgs). Attach a suitable lifting device prior to lifting. Failure to comply may result in injury to personnel or damage to equipment. Step (2) requires the aid of an assistant. Step (1) requires the aid of an assistant.