TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 358 of 1414
TM 9-2320-365-34-2 7-4. TRANSMISSION ASSEMBLY REPLACEMENT (USUAL CONDITIONS) (CONT) CAUTION Due to position of main housing module connector, extreme care must be taken when installing pigtail adapter connector. Failure to comply may result in damage to equipment. NOTE • Transmissions with serial numbers lower than 6510032369 require the use of a transmission adapter harness (part number 29519210) to adapt to the transmission external wiring harness. Transmissions with serial numbers higher than 6510032369 do not require the use of a transmission adapter harness. • Install plastic cable ties as required. (64) Position transmission adapter harness (75) in main housing module receptacle (76) with connector bolt (77). (65) Tighten connector bolt (77) to 12-24 lb-in. (1-3 N·m). NOTE Perform steps (66) through (68) on transmission serial number 6510032369 and higher. (66) Remove nut (78) and washer (79) from transmission adapter harness (80). (67) Install transmission adapter harness (80) in bracket (44) with washer (79) and nut (78). (68) Connect transmission external wiring harness connector (81) to transmission adapter harness (80). 7-38 Change 1