TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 333 of 1414
TM 9-2320-365-34-2 NOTE • Step (6) requires the aid of an assistant. • Perform step (6) on vehicles equipped with transmission oil cooler hoses. (6) Remove four self-locking nuts (11), bolts (12), and lower front support crossmember (13) from vehicle. Discard self-locking nuts. CAUTION Cap or plug hydraulic connections to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE • Perform steps (7) through (11) on vehicles equipped with transmission oil cooler tubes. • Tag tubes and connection points prior to disconnecting. (7) Disconnect transmission oil cooler tube (14) from 90- degree fitting (15). (8) Disconnect oil cooler tube (16) from 90-degree fitting (17). (9) Loosen two jam nuts (18) on 90-degree fittings (15 and 17). NOTE Note position of fittings prior to removal. (10) Remove 90-degree fittings (15 and 17) from transmission (7). (11) Remove two preformed packings (19) from 90-degree fittings (15 and 17). Discard preformed packings. Change 1 7-27