TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 323 of 1414

TM 9-2320-365-34-2 7-2. TORQUE CONVERTER REPLACEMENT/REPAIR (CONT) (11) Position shim (3), recessed side down, in torque converter module (1) with bolt (4). (12) Tighten bolt (4) to 66-81 lb-ft (89-110 N m). WARNING Use care when installing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. NOTE Perform steps (13) and (14) on transmissions prior to serial number 6510165560. (13) Install retainer packing (5) on converter end plug (6). (14) Install converter end plug (6), flat side up, in torque converter module (1) with retaining ring (7). Change 1 7-17