TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 314 of 1414
TM 9-2320-365-34-2 7-2. TORQUE CONVERTER REPLACEMENT/REPAIR (CONT) (20) Measure thickness (A) of stator thrust plate (14), minimum thickness 0.505 in. (12.83 mm). d. Assembly. NOTE Perform steps (1) through (3) if replacing a six splined converter pump with a two splined converter pump. (1) Replace cycloidal gear PN 23049376 and gear bushing PN 6881926 with cycloidal gear PN 29514537 and gear bushing PN 29514538 (para 21-3). (2) Replace pump housing PN 29502322 with pump housing PN 29514801, ball PN 145651, spring PN 29507709, and pin PN 29516030 (para 21-3). (3) Replace drive hub PN 29503970 and gear PN 29511395 with drive hub PN 29514799 and gear PN 29511395 (para 21-5). (4) Install thrust pump washer (1) in converter pump (2). 7-10