TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 306 of 1414
TM 9-2320-365-34-2 7-2 Change 2 Section II. MAINTENANCE PROCEDURES 7-2. TORQUE CONVERTER REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transmission mounted on maintenance stand (para 7-5). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-175 lb-ft. (Item 80, Appendix B) Gage, Profile (TM 9-2320-365-20) Caliper, Vernier (Item 8, Appendix B) Caliper, Micrometer (Item 7, Appendix B) Straight Edge (Item 61, Appendix B) Gage Set, Telescoping (Item 21, Appendix B) Gage, Depth, Micrometer (Item 22, Appendix B) Pan, Drain (Item 36, Appendix B) Inserter, Bearing and Bushing (TM 9-2320-365-20) Socket Wrench Attachment, Screwdriver (Item 53, Appendix B) Goggles, Industrial (Item 25, Appendix B) Gloves, Rubber (Item 23, Appendix B) Chain, Welded (TM 9-2320-365-10) Adapter (3/8 to 1/2") (NSN 5120-01-335-0701) Tools and Special Tools (Cont) Socket Wrench Attachment, Screwdriver (3/4 Hex, 1/2 Drive) (NSN 5120-01-367-3468) Materials/Parts Packing, Retainer (Item 217, Appendix F) Washer, Seal (Item 300, Appendix F) Sealring (Item 281, Appendix F) Spring, Flat (13) (Item 290, Appendix F) Packing, Retainer (Item 216, Appendix F) Bolt, Machine (2) (Item 15, Appendix C) Washer, Flat (2) (Item 92, Appendix C) Rag, Wiping (Item 59, Appendix C) Solvent, Dry Cleaning (Item 81, Appendix C) Lubricating Oil, Engine (Item 48, Appendix C) Personnel Required (2) a. Removal. (1) Rotate transmission on maintenance stand so that torque converter module (1) is in up position. (2) Remove retaining ring (2) from torque converter module (1). WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. NOTE Perform steps (2) through (6) on transmissions prior to serial number 6510165560.