TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 298 of 1414
TM 9-2320-365-34-2 6-7. TRANSMISSION EXTERNAL WIRING HARNESS REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Batteries disconnected (TM 9-2320-365-20-3). Cab raised (TM 9-2320-365-10). Tools and Special Tools Wrench, Torque, 0-150 lb-in. (Item 79, Appendix B) Tools and Special Tools (Cont) Goggles, Industrial (Item 25, Appendix B) Tool Kit, Genl Mech (Item 68, Appendix B) Wrench Set, Socket (Item 75, Appendix B) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 29, Appendix C) Ties, Cable Plastic (Item 87, Appendix C) Nut, Self-Locking (Item 130, Appendix F) a. Removal. NOTE • Tag connectors and connection points prior to disconnecting. • Remove plastic cable ties as required. (1) Disconnect transmission external harness (1) from bulkhead receptacle J119 (2). (2) Disconnect transmission external harness (1) from throttle position sensor (3). 6-38