TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 286 of 1414
TM 9-2320-365-34-2 6-6. STARTING MOTOR REPAIR (P/N M0017703ME) (CONT) NOTE Replace starting motor solenoid if continuity is present between starting motor solenoid positive terminal and starting motor solenoid ground terminal. (7) Check for continuity between starting motor solenoid positive terminal (5) and starting motor solenoid ground terminal (6). (8) Inspect nose housing (7) for cracks, pitting, or corrosion. (9) Inspect drive (8) for broken, chipped, or worn teeth. NOTE Replace brush plate if brush springs fail visual inspection. (10) Check brush springs (9) for cracks, nicks, breaks, or distortion. NOTE Replace all four brushes if any brush measures less than 0.625 in. (15.875 mm). (11) Measure four brushes (10) for serviceability. 6-36.6 Change 1