TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 265 of 1414

TM 9-2320-365-34-2 NOTE Replace starting motor if drive housing fails visual inspection or resistance checks. (15) Inspect starting drive housing (19) for cracks, pitting, or corrosion. NOTE Replace drive housing if continuity is not present between field coil terminals and drive housing. (16) Measure resistance between field coil terminals (20 and 21). (17) Measure resistance between field coil terminals (20 and 21) and ground terminal (22). c. Assembly. (1) Position washer (1), fiber washer (2), and washer (3) on armature (4). (2) Install bushing (5) in brush housing (6). (3) Install preformed packing (7) on brush housing (6). (4) Install oil wick (8) and plug (9) in brush housing (6). 6-21