TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 263 of 1414
TM 9-2320-365-34-2 NOTE Replace starting motor solenoid if boot is damaged. (3) Inspect boot (4) for tears or cracks. CAUTION Replace link spool if surface is nicked. Failure to comply will result in damage to equipment. (4) Inspect plunger (5) for nicks and scratches. NOTE Replace starting motor solenoid if continuity is present between starting motor solenoid positive terminal and starting motor solenoid ground terminal. (5) Check for continuity between starting motor solenoid positive terminal (6) and starting motor solenoid ground terminal (7). (6) Inspect nose housing (8) for cracks, pitting, or corrosion. (7) Inspect starting motor solenoid drive (9) for broken, chipped, or worn teeth. 6-19