TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 250 of 1414
TM 9-2320-365-34-2 6-2. 100 AMP ALTERNATOR REPAIR (CONT) (26) Remove three screws (40), lockwashers (41), and washers (42) from rotor (43). Discard lockwashers. (27) Install three jacking screws in small threaded holes in rotor (43). (28) Remove rotor (43) from shaft (3) by alternately turning jacking screws two full turns. (29) Remove three jacking screws from rotor (43). b. Assembly. WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush with water and get immediate medical attention. Failure to comply may result in injury to personnel. (1) Apply sealing compound to threads of three screws (1). (2) Position rotor (2) on shaft (3) with three washers (4), lockwashers (5) and screws (1). (3) Tighten three screws (1) to 45 lb-in. (5 N•m). 6-6