TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 246 of 1414
TM 9-2320-365-34-2 Section II. MAINTENANCE PROCEDURES 6-2. 100 AMP ALTERNATOR REPAIR This task covers: a. Disassembly b. Assembly INITIAL SETUP Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque 0-175 lb-ft (Item 80, Appendix B) Puller Kit, Universal (Item 44, Appendix B) Wrench, Torque 0-200 lb-in. (Item 81, Appendix B) Hammer, Soft Head (Item 28, Appendix B) Press, Arbor Hand Operated (Item 41, Appendix B) Wrench Set, Socket (Item 75, Appendix B) Materials/Parts Grease, Molybdenum Disulfide (Item 38, Appendix C) Dispenser, Pressure Sensitive Adhesive Tape (Item 31, Appendix C) Materials/Parts (Cont) Sealing Compound (Item 75, Appendix C) Nut, Self-locking (Item 153, Appendix F) Lockwasher (4) (Item 108, Appendix F) Nut, Self-Locking (Item 122, Appendix F) Lockwasher (2) (Item 109, Appendix F) Nut, Self-Locking (18) (Item 150, Appendix F) Lockwasher (6) (Item 107, Appendix F) Screw, Cap (3) (Item 252, Appendix F) a. Disassembly (1) Remove self-locking nut (1) and washer (2) from shaft (3). Discard self-locking nut. (2) Remove key (4), and pulley bushing (5) from shaft (3). (3) Remove four screws (6), lockwashers (7), and cover plate (8) from front housing (9). Discard lockwashers. (4) Remove self-locking nut (10), washer (11), and fan (12) from shaft (3). Discard self-locking nut. 6-2