TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 231 of 1414
TM 9-2320-365-34-2 (8) Install preformed packing (13) on 90-degree fitting (14). (9) Install 90-degree fitting (14) on fuel governor (4). (10) Install check valve (15) in fuel governor (4). (11) Install preformed packings (16 and 17) on adapter (18). (12) Install adapter (18) in fuel governor (4). (13) Install 90-degree fitting (19) on adapter (18). (14) Install gasket (20) on fuel governor (4). d. Installation. (1) Position fuel governor (1) on engine (2) with three washers (3) and bolts (4). (2) Tighten three bolts (4) to 15-25 lb-ft (20-34 N·m). (3) Install preformed packing (5) on adapter sleeve (6). WARNING Use care when installing retaining clips. Retaining clips are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (4) Install clevis pin (7) and retaining clip (8) in fuel governor clevis (9). 4-43