TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 222 of 1414
TM 9-2320-365-34-2 4-7. FUEL CONTROL LINKAGE REPLACEMENT (CONT) (4) Verify fuel control linkage (1) rotates freely. (5) Hold fuel control linkage (1) in place. (6) Tighten four screws (4) to 24-36 lb-in. (3-4 N·m). NOTE If free movement of fuel control linkage is not obtained, perform steps (7) through (9). (7) Loosen four screws (4) on mounting brackets (5). (8) Verify that fuel control linkage (1) will rotate freely. (9) Tighten four screws (1) to 24-36 lb-in. (3-4 N·m). c. Follow-On Maintenance. Perform fuel injector synchronization (para 4-3). End of Task. 4-34