TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 221 of 1414

TM 9-2320-365-34-2 NOTE If cylinder head is to be replaced proceed to step (8). (4) Install injector spring compressor on No. 1 fuel injector (7). (5) Tighten bolt to compress injector spring compressor . (6) Tap injector spring compressor lightly with soft hammer. (7) Perform steps (4) through (6) on remaining five fuel injectors (7). (8) Remove four bolts (8) from fuel control linkage (9). (9) Disconnect fuel control linkage (9) from each fuel injector (7). (10) Remove fuel control linkage (9) from cylinder head (10). b. Installation. (1) Position fuel control linkage (1) on cylinder head (2). (2) Engage all six fuel injectors (3). CAUTION Ensure dowel on each mounting bracket is properly positioned and mounting bracket is flush against cylinder head. Failure to comply may result in damage to equipment. (3) Position four screws (4) in mounting brackets (5). 4-33