TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 212 of 1414
TM 9-2320-365-34-2 4-6. TURBOCHARGER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 79, Appendix B) Wrench Set, Socket (Item 75, Appendix B) Materials/Parts Compound, Antiseize (Item 13, Appendix C) Materials/Parts (Cont) Nut, Self-Locking (2) (Item 146, Appendix F) Lockwasher (2) (Item 96, Appendix F) Gasket (Item 48, Appendix F) Packing, Preformed (Item 204, Appendix F) Gasket (Item 60, Appendix F) Ring, Seal (Item 249, Appendix F) Packing, Preformed (Item 194, Appendix F) Locknut, Tube Fitting (4) (Item 87, Appendix F) Gasket (Item 57, Appendix F) Rag, Wiping (Item 59, Appendix C) a. Removal. CAUTION Ensure all openings of turbocharger are covered with wiping rags during removal. Failure to comply may result in damage to equipment. (1) Remove self-locking nut (1) from clamp (2). Discard self-locking nut. (2) Remove lower exhaust pipe (3) from upper exhaust pipe (4). (3) Remove clamp (2) from lower exhaust pipe (3). (4) Remove two bolts (5) from exhaust pipe bracket (6). 4-24