TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 206 of 1414
TM 9-2320-365-34-2 4-5. FUEL TIMING CHECKS This task covers: a. Fuel Timing Checks b. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Valve cover removed (TM 9-2320-365-20-2). Fuel setting check completed (para 4-4). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Tools and Special Tools (Cont) Tool Kit, Intl. Comb. Eng. (TM 9-2320-365-20) Wrench, Torque, 0-60 N·m (Item 84, Appendix B) Wrench Set, Socket (Item 75, Appendix B) Personnel Required (2) a. Fuel Timing Checks. CAUTION Crankshaft must always be rotated to right to align timing bolt with flywheel. Failure to comply may result in damage to equipment. NOTE Use bolt on front of alternator to rotate crankshaft for timing bolt installation. (1) Rotate crankshaft to the right two complete revolutions. (2) Remove plug (1) from timing hole on front of flywheel housing (2). NOTE • Steps (3) through (8) requires the aid of an assistant. • Mark damper to engine front cover when timing bolt engages with flywheel. (3) Install timing bolt (3) in timing hole on front of flywheel housing (2). 4-18