TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 202 of 1414
TM 9-2320-365-34-2 4-4. FUEL SETTING CHECK (CONT) NOTE Perform steps (14) and (15) if small diameter of insertion tool does not contact face of fuel governor. (14) Remove fuel ratio control air tube (16) from fuel governor (12). (15) Apply 15 psi (105 kPa) of air to fuel ratio control port (17) on fuel governor (12). (16) Push down on rack lever (18) and quickly release it. (17) Perform step (16) until smooth movement of fuel injector rack (19) is attained. NOTE Refer to engine information plate on valve cover for correct fuel setting (Full Load Static Fuel). (18) Verify reading on dial indicator is within +/- 0.25 mm of specified fuel setting. 4-14