TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 200 of 1414
TM 9-2320-365-34-2 4-4. FUEL SETTING CHECK This task covers: a. Fuel Setting Check b. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Valve cover removed (TM 9-2320-365-20-2). Fuel shutoff solenoid removed (para 6-4). Fuel injectors synchronized (para 4-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Tool Kit, Intl. Comb. Eng. (TM 9-2320-365-20) Wrench, Torque, 0-60 N·m (Item 84, Appendix B) a. Fuel Setting Check. CAUTION Injector spring compressor must be installed on all fuel injectors that have the rocker arms removed. Failure to comply may result in internal damage to fuel injectors. NOTE Hold rocker arm assembly level when removing from engine to prevent disassembly. (1) Remove four bolts (1) from No. 1 cylinder rocker arm (2). (2) Remove No. 1 cylinder rocker arm (2) from cylinder head (3). (3) Remove bolt (4) from cylinder head (3). CAUTION Ensure end of injector rack bar is clean. Failure to comply may result in faulty reading. (4) Install the shortest (0.442 in.) dial indicator contact point on dial indicator group. (5) Install dial indicator group with bolt (5) on cylinder head (3). 4-12