TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 196 of 1414
TM 9-2320-365-34-2 4-3. FUEL INJECTOR SYNCHRONIZATION (CONT) (18) Push down and quickly release fuel injector lever (14) to ensure smooth movement of injector rack bar (6) on fuel injector being synchronized. (19) Verify dial indicator reads +0.01 to +0.05 mm. (20) Perform steps (14) through (19) two or three times to confirm reading. NOTE • If reading is correct, go to step (29). • If reading is not correct, continue with step (21). (21) Loosen locking nut (15) and fuel setting screw (16) out to the left. (22) Firmly push No.1 injector rack head (9) of No.1 injector until rack stop (10) contacts injector base (11). (23) Hold No.1 injector rack head (9) in this position for steps (24) and (25). (24) Push down and quickly release fuel injector lever (14) to ensure smooth movement of injector rack bar (6) on fuel injector being synchronized. (25) Turn fuel setting screw (16) right until dial indicator reads +0.01 to +0.05 mm. 4-8