TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 193 of 1414
TM 9-2320-365-34-2 4-3. FUEL INJECTOR SYNCHRONIZATION This task covers: a. Fuel Injector Synchronization b. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Valve cover removed (TM 9-2320-365-20-2). Fuel shutoff solenoid removed (para 6-4). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Tool Kit, Intl. Comb. Eng. (TM 9-2320-365-20) Tools and Special Tools (Cont) Wrench, Torque, 0-60 N·m (Item 84, Appendix B) Hammer, Hand Soft Head (Item 28, Appendix B) Materials/Parts Lubricating Oil, Engine (Item 48, Appendix C) Personnel Required (2) a. Fuel Injector Synchronization. CAUTION • This task must be performed when any fuel injector is replaced. If No. 1 fuel injector is replaced, all injectors must be synchronized. Failure to comply may result in damage to equipment. • Hold rocker arm assembly level when removing from engine to prevent disassembly. Failure to comply may result in damage to equipment. (1) Remove four bolts (1) from rocker arm assembly (2). (2) Remove rocker arm assembly (2) from cylinder head (3). (3) Apply a small amount of clean lubricating oil to top of No. 1 fuel injector (4). 4-5