TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 191 of 1414
TM 9-2320-365-34-2 b. Installation. NOTE All six fuel injectors are installed the same way. One fuel injector shown. (1) Install preformed packings (1 and 2) on fuel injector (3). (2) Position fuel injector (3) in cylinder head (4). (3) Rotate fuel injector (3) to engage with rack control linkage (5). (4) Push down on fuel injector (3) to seat into bore of cylinder head (4). CAUTION Do not use bolt to push the fuel injector down into cylinder head. Failure to comply may result in damage to equipment. (5) Position washer (6) and fuel injector hold down bolt (7) in fuel injector hold down bracket (8). (6) Tighten bolt (7) to 72-144 lb-in. (8-16 N m). 4-3