TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 185 of 1414
TM 9-2320-365-34-2 Change 2 3-134.1/3-134.2 Blank) (3.1) Position three gaskets (8) and exhaust manifold (9) on cylinder head (10) with 12 shims (11) and screws (1). (4) Tighten 12 screws (1) to 24-48 lb-in. (3-5 N m) in sequence shown. (5) Re-tighten 12 screws (1) to 29-37 lb-ft (39-50 N m) in sequence shown. NOTE Perform step (6) on exhaust manifolds equipped with retaining rings. (6) Bend tabs on five retaining rings (7) and retaining ring (4). (7) Tighten 12 screws (1) to 24-48 lb-in (3-5 N•m) in sequence shown. (8) Re-tighten 12 screws (1) to 29-37 l-ft (39-50 N•m) in sequence shown. NOTE Perform step (3.1) on exhaust manifolds equipped with shims