TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 184 of 1414
TM 9-2320-365-34-2 3-134 Change 2 3-23. EXHAUST MANIFOLD REPLACEMENT (CONT) (3) Remove 12 screws (9), shims (10), and exhaust manifold (11) from cylinder head (12). (4) Remove three gaskets (13) from cylinder head (12). Discard gaskets. b. Installation. (1) Apply antiseize compound to threads of 12 screws (1). (2) Position exhaust manifold (2), gasket (3), and retaining ring (4) on cylinder head (5) with two screws (1). (3) Position two gaskets (6), five retaining rings (7), and 10 screws (1) on exhaust manifold (2). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. NOTE Perform steps (3) and (4) on exhaust manifolds equipped with shims. NOTE Perform steps (2) and (3) on exhaust manifold equipped with retaining rings.