TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 183 of 1414
TM 9-2320-365-34-2 Change 2 3-133 3-23. EXHAUST MANIFOLD REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Turbocharger removed (para 4-6). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 79, Appendix B) Tools and Special Tools (Cont) Wrench Set, Socket (Item 75, Appendix B) Materials/Parts Ring, Retaining (Item 245, Appendix F) Ring, Retaining (5) (Item 246, Appendix F) Gasket (3) (Item 45, Appendix F) Compound, Antiseize (Item 13, Appendix C) a. Removal. (1) Remove 10 screws (1) and five retaining rings (2) from manifold (3). Discard retaining rings. (2) Remove two screws (4), retaining ring (5), gasket (6), two gaskets (7), and manifold (3) from cylinder head (8). Discard gaskets. NOTE • Vehicles are equipped with two different exhaust manifolds. Exhaust manifolds are equipped with retaining rings or shims. Both exhaust manifolds fit all engines. Mounting hardware is not interchangeable. • Perform steps (1) and (2) on exhaust manifolds equipped with retaining rings.