TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 167 of 1414
TM 9-2320-365-34-2 WARNING Use care when removing springs. Springs are under tension and can act as projectiles when removed. Failure to comply may result in injury to personnel. (3) Remove plug (7), spring (8), and bypass valve (9) from oil filter base (4). (4) Remove preformed packing (10) from plug (7). Discard preformed packing. b. Installation. NOTE Apply lubricating oil to all parts during assembly. (1) Install bypass valve (1) and spring (2) in oil filter base (3). (2) Install preformed packing (4) on plug (5). (3) Install plug (5) in oil filter base (3). (4) Install three preformed packings (6) on oil filter base (3). (5) Position oil filter base (3) on engine (7) with five washers (8), two bolts (9), and three screws (10). (6) Tighten two bolts (9) and three screws (10) to 15-25 lb-ft (20-34 N·m). 3-117