TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 164 of 1414
TM 9-2320-365-34-2 3-17. OIL PUMP REPLACEMENT This task covers: a. Removal b. Installation c. Follow-on Maintenance INITIAL SETUP Equipment Conditions Oil pan removed (para 3-16). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Goggles, Industrial (Item 25, Appendix B) Wrench Set, Socket (Item 75, Appendix B) Tools and Special Tools (Cont) Gloves, Rubber (Item 23, Appendix B) Materials/Parts Gasket (Item 61, Appendix F) Packings, Preformed (2) (Item 193, Appendix F) Lockwasher (Item 99, Appendix F) Solvent, Dry Cleaning (Item 81, Appendix C) WARNING Wear appropriate eye protection when working under vehicle. Falling debris may cause eye injury. Failure to comply may result in injury to personnel. a. Removal. (1) Remove two screws (1) and washers (2) from pick-up tube bracket (3). (2) Remove two screws (4), washers (5), oil pick-up tube (6), and gasket (7) from oil pump (8). Discard gasket. (3) Remove two screws (9), oil discharge tube (10), and two preformed packings (11) from oil pump (8). Discard preformed packings. (4) Remove two screws (12), lockwashers (13), and oil pump (8) from engine (14). Discard lockwashers. 3-114