TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 158 of 1414
TM 9-2320-365-34-2 3-16. OIL PAN REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-3220-365-10). Coolant drained (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Container (Capacity 25 qt (24 L) Hammer, Soft Head (Item 28, Appendix B) Goggles, Industrial (Item 25, Appendix B) Materials/Parts Packing, Preformed (Item 190, Appendix F) Gasket (Item 47, Appendix F) Packing, Preformed (Item 200, Appendix F) Cap and Plug Set (Item 18, Appendix C) Lubricating Oil, Engine (Item 45, Appendix C) Cement, Gasket (Item 35, Appendix C) Sealing Compound (Item 73, Appendix C) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. (1) Position container under drain plug (1). (2) Remove drain plug (1) from oil pan (2). (3) Remove preformed packing (3) from drain plug (1). Discard preformed packing. 3-108