TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 155 of 1414
TM 9-2320-365-34-2 3-15. ENGINE FRONT COVER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Radiator drained (TM 9-2320-365-10). Transmission oil cooler tube removed (TM 9-2320-365- 20-3). Upper coolant tube removed (TM 9-2320-365-20-3). Air compressor inlet and outlet coolant tubes removed (TM 9-2320-365-20-3). Engine fan and fan clutch removed (TM 9-2320-365- 20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Materials/Parts Gasket (Item 62, Appendix F) Dispenser, Pressure Sensitive Adhesive Tape (Item 31, Appendix C) a. Removal. (1) Remove screw (1) and bracket (2) from engine front housing (3). (2) Remove screw (4) and bracket (5) from engine front cover (6). (3) Remove 13 screws (7) from engine front cover (6). (4) Remove two screws (8), washers (9), engine front cover (6), and gasket (10) from engine front housing (3). Discard gasket. 3-105