TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 145 of 1414
TM 9-2320-365-34-2 3-13. CAM ROLLER FOLLOWERS REPLACEMENT This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Rocker arms and push rods removed (para 3-12). Fuel filter removed (TM 9-2320-365-20-3). Fuel governor removed (para 4-9). Air compressor removed (para 11-2). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-300 lb-in. (Item 83, Appendix B) Adapter, Socket Wrench (Item 3, Appendix B) Goggles, Industrial (Item 25, Appendix B) Gloves, Rubber (Item 23, Appendix B) Tools and Special Tools (Cont) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Socket Wrench Attachment, Screwdriver (TM 9-2320- 365-20) Wrench Set, Socket (Item 75, Appendix B) Materials/Parts Gasket (Item 55, Appendix F) Gasket (3) (Item 63, Appendix F) Dispenser, Pressure Sensitive Adhesive Tape (Item 31, Appendix C) Solvent, Dry Cleaning (Item 81, Appendix C) Rag, Wiping (Item 59, Appendix C) a. Removal. (1) Loosen hose clamp (1) on oil fill hose (2). (2) Remove oil fill hose (2) from oil fill tube (3). (3) Remove two screws (4), washers (5), oil fill tube (3), and gasket (6) from center side cover (7). Discard gasket. 3-95