TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 141 of 1414
TM 9-2320-365-34-2 (8) Remove two jam nuts (10) from valve adjustment screws (11). NOTE Valve adjustment screws are removed through bottom of rocker arm. (9) Remove valve adjustment screws (11) from rocker arms (3 and 5). c. Cleaning and Inspection. WARNING • Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and gloves; use only in well ventilated area; avoid contact with skin, eyes, and clothes, and do not breathe vapors. Keep away from heat or flame. Never smoke when using solvent; the flashpoint for Type I Dry Cleaning Solvent is 100 ° F (38 ° C) and for Type II is 130 ° F (50 ° C). Failure to comply may result in serious injury or death to personnel. • If personnel become dizzy while using cleaning solvent, immediately get fresh air and medical help. If dry cleaning solvent contacts skin or clothes, flush with cold water. If dry cleaning solvent contacts eyes, immediately flush eyes with water and get immediate medical attention. (1) Clean all parts with dry cleaning solvent. NOTE Replace any part that fails visual inspection. (2) Inspect two rocker arms (1) for cracks or signs of wear. (3) Inspect unit arm (2) for cracks or signs of wear. (4) Inspect injector adjustment screw (3) and two valve adjustment screws (4) for damaged threads. (5) Inspect arm button (5) for signs of wear. (6) Inspect retaining ring (6) for signs of wear. 3-91