TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 139 of 1414
TM 9-2320-365-34-2 3-12. ROCKER ARM AND PUSH ROD REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning and Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Valve cover removed (TM 9-2320-365-20-2). Fuel shutoff solenoid removed (para 6-4). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Socket Wrench Attachment, Screwdriver (TM 9- 2320-365-20) Adapter, Socket Wrench (Item 3, Appendix B) Tools and Special Tools (Cont) Goggles, Industrial (Item 25, Appendix B) Gloves, Rubber (Item 23, Appendix B) Materials/Parts Rag, Wiping (Item 59, Appendix C) Solvent, Dry Cleaning (Item 81, Appendix C) Lubricating Oil, Engine (Item 45, Appendix C) Dispenser, Pressure Sensitive Adhesive Tape (Item 31, Appendix C) a. Removal. NOTE • All six rocker arm groups are removed the same way. No. 1 rocker arm group shown. • No. 1 cylinder rocker arm group will have a deflector. (1) Remove four bolts (1) and deflector (2) from rocker arm group (3). CAUTION Hold rocker arm group level when removing from engine to prevent accidental disassembly. Failure to comply may result in damage to equipment. (2) Remove rocker arm group (3) from cylinder head (4). 3-89