TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 128 of 1414
TM 9-2320-365-34-2 3-8. CRANKSHAFT FRONT SEAL REPLACEMENT (CONT) (9) Tighten four screws (5) to 98-142 lb-ft (133-193 N·m). (10) Position water pump belt (10) on pulley (9). CAUTION Maintain correct belt tension while tightening screws. Failure to comply may result in damage to equipment. NOTE • Belt tension for new belt is 115-125 lbs (512-556 N). For reinstalled belt 85-95 lbs (378-442 N). • Steps (11) and (12) require the aid of an assistant. (11) Adjust water pump belt (10) to 115-125 lb (512-556 N). (12) Tighten screws (11 and 12) to 15-25 lb-ft (20-34 N·m). c. Follow-On Maintenance. (1) Install pulley damper (para 3-7). (2) Start engine (TM 9-2320-365-10). (3) Raise cab (TM 9-2320-365-10). (4) Check crankshaft front seal for oil leaks. (5) Lower cab (TM 9-2320-365-10). (6) Shut down engine (TM 9-2320-365-10). End of Task. 3-80