TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 1261 of 1414

TM 9-2320-365-34-2 D-36. D-36. WOODEN WOODEN SKID SKID FABRICATION FABRICATION 12420036 12420036 Cut, shape and drill the wooden skid from bulk wood stock according to the following information. Figure D-50. Wooden Skid illustrates the dimensions and hole locations. Figure D-50. Wooden Skid a. All dimensions are in inches (millimeters). b. Fabricate (1) from MIL-STD 736 Group IV untreated bulk wood stock as illustrated in Figure D-50. Wooden Skid. c. Drill 0.625 in. (15.8 mm) diameter hole 2 places as shown in Figure D-50. Wooden Skid. d. Sand and remove sharp edges. e. Mark 19207-12420036 with characters 0.25 in. (6.5 mm) high using ink TT-I-1795 where shown in Figure D-50 Wooden Skid and clear coat with lacquer per TT-L-50. D-61 D-61