TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 125 of 1414
TM 9-2320-365-34-2 3-8. CRANKSHAFT FRONT SEAL REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance. INITIAL SETUP Equipment Conditions Pulley damper removed (para 3-7). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Inserter, Seal (TM 9-2320-365-20) Drill, Portable Electric (Item 18, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Goggles, Industrial (Item 25, Appendix B) Gage, Belt Tension (TM 9-2320-365-20) Puller Kit, Universal (Item 45, Appendix B) Caliper, Vernier (Item 8, Appendix B) Tools and Special Tools (Cont) Drill Set, Twist (Item 17, Appendix B) Materials/Parts Lubricating Oil, Engine (Item 45, Appendix C) Soap, Laundry (Item 79, Appendix C) Seal, Plain Encased (Item 268, Appendix F) Excluder (Item 24, Appendix F) Personnel Required (2) a. Removal. (1) Loosen screws (1 and 2) on bracket (3). (2) Remove water pump belt (4) from pulley (5). (3) Remove four screws (6), plate (7), and pulley (5) from crankshaft (8). (4) Remove excluder (9) from pulley (5). Discard excluder. 3-77