TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 120 of 1414
TM 9-2320-365-34-2 3-6. CYLINDER HEAD/HEAD GASKET REPLACEMENT (CONT) (3) Install preformed packing (5) on 90-degree fitting (6). (4) Install 90-degree fitting (6) in cylinder head (4). (5) Install preformed packing (7) on 90-degree fitting (8). (6) Install 90-degree fitting (8) in cylinder head (4). (7) Install front lifting eye bracket (9) on cylinder head (4) with four washers (10) and screws (11). (8) Install rear lifting eye bracket (12) on cylinder head (4) with five washers (13) and screws (14). WARNING Cylinder head weighs approximately 150 lbs (68 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (9) requires the aid of an assistant. (9) Position gasket (15) and cylinder head (4) on cylinder block (16). 3-72