TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1187 of 1414
TM 9-2320-365-34-2 APPENDIX B TOOLS IDENTIFICATION LIST Section I. INTRODUCTION B-1. INTRODUCTION This appendix lists common tools, supplements, and special tools/fixtures that are suggested for maintenance tasks performed at the direct support/general support maintenance level. B-2. EXPLANATION OF COLUMNS a. Column (1) - Item Number. This number is assigned to the entry in the listing and is referenced in the narrative instructions to identify the item, e.g., "Bar, Pry (Item 1, Appendix B)." b. Column (2) - Item Name. This column contains the nomenclature for the item. c. Column (3) - National Stock Number. This is the national stock number assigned to the item which you can use to requisition it. d. Column (4) - Part Number. This provides the Government, manufacturer, or vendor part number for the item. e. Column (5) - Reference. This column contains the shop catalog (SC), technical manual, or other publication which provides an illustration and description of the item, or lists whether the item is fabricated. Section II. TOOLS IDENTIFICATION LIST (1) Item Number (2) Item Name (3) National Stock Number (4) Part Number (5) Reference 1 ADAPTER, SOCKET WRENCH 5120-00-144-5207 11655788-3 SC 4910-95-A31 2 ADAPTER, SOCKET WRENCH 5120-00-227-8103 A-A-2172 SC 4910-95-A31 3 ADAPTER, SOCKET WRENCH 5120-00-240-8702 GAX-1 SC 4910-95-A31 4 BLADE, HAND, HACKSAW 5110-00-277-4587 RS1018 SC 5180-90-CL-N05 5 BRUSH, WIRE 7920-00-291-5815 D-1416 SC 4910-95-A31 6 CALIPER SET, MICROMETER, 5120-01-117-0468 6181 SC 4910-95-A31 7 CALIPER, MICROMETER, 5120-00-221-1921 124B SC 4910-95-A02 8 CALIPER, VERNIER 5120-01-113-1548 6420 SC 4910-95-A31 B-1